Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Sewing with leather

#1
Sewing leather and fur do not differ too much from sewing other types of material its just the fur can tend to get in the way. The key to sewing leather is to always try your stitch on a piece of scrap before you start the actually sewing and then make sure you have your pattern accurate for the piece you will be sewing. The reason this is so crucial is that once you have stitched leather, if you make a mistake and need to undo the stitch, the leather will be weakened and you will be left with holes.

Stitching

Another tip is that depending on the thickness of the leather or fur, you want to lengthen your stitch to three or more. Obviously, the thicker the seam will be, the longer you need to make the length of the stitch. If you make your stitch too small, what happens is that the leather is punctured too close together, causing tears.

Another important tip is that you should always leave long threads at both the start and end of the seams so you can tie them off by hand. The only time you would use a backstitch is when the seam will be encased or crossed over by another seam. You can keep the seams together simply by placing a very small, strong in the seam allowance when sewing leather.

As you work with patterns, you will discover that leather garments have the same interfacing in the same locations just as you would find with other types of material. If you need to fuse your leather, an excellent product on the market called Leather Fuse is made specifically for leather. With this solution, the leather is fused quicker and at lower temperature settings, as not to damage the leather.

Now keep in mind that if you need to press an area of a pattern down, you can by using a small amount of steam. Since leather goes through a quality tanning process, there is no need to worry about shrinkage. Just be sure you place a brown paper press cloth in between the iron and the leather and never leave the iron sitting on the leather for very long...

Rest of the article is found here http://www.fibre2fashion.com/industry-ar...her?page=1
  Reply



Forum Jump:


Users browsing this thread:
1 Guest(s)

User Panel

Welcome guest, not a member yet?

Why not sign up today and start posting on out community forums.


  Register

Navigation


Latest Topics

Forum software by © MyBB Theme © iAndrew 2016